Injector IR 29
13
2)
If necessary, the rod mesh belt can be separated from the
belt frame and cleaned individually!
3)
Fold the loading ramp to the cleaning position after re-
moving the transport belt!
Remove the softer if so equipped!
1)
Hook the softer into the holder of the tool magazine pro-
vided!
Remove the filter!
1)
Hook the filter into the holder of the tool magazine pro-
vided!
5
Service: Care, maintenance, repair
Any work related in any way with service may be carried out only by
Rühle service technicians and by persons authorised by Rühle in writ-
ing. In this regard, a distinction is made between regular care and
maintenance and repair. The respective qualification certificate must
be issued explicitly for the corresponding work.
Follow also the safety instructions in Chapter 1.1!
Notify and obtain permission from Rühle customer service if
welding or cutting work is required on the machine!
Make sure when working on the electrical equipment of the
machine that
this is only done by qualified personnel!
the machine is always disconnected from power!
a waiting time of at least 10 minutes is observed after
switching off the machine to allow the capacitor of the
frequency converter to discharge to a safe voltage
level!
