50
Hardware Mounting
Chapter 4. Hardware Mounting
Mounting Instructions
Read all instructions thoroughly before beginning the installation procedure.
To prevent the damage to the hardware or injury to personnel, always ensure that there are two
individuals to help in carrying and supporting the installation/removal process.
Assembly Site
The VM-521 is ruggedized for harsh operational conditions. For best installation practices observe
the following installation guidelines:
Do not expose the Industrial PC to direct heat. Make sure that there is sufficient cross
ventilation.
Allow at least 15 mm more depth for front installation devices to ensure sufficient air
circulation.
Do not mount the device on equipment that strongly vibrates. Shock absorbers and vibration
dampers may be required if installing in such environments.
Tools Required
You need the following tools for mounting or opening the device:
Philips recessed head screwdriver, size 1 (PH 1)
Device Enclosure
The VM-521 supports the installation of various wall and wall mounting brackets. The following
illustrations displays the screw locations for the supported installation types.
To prevent any damage or injury, make sure the mounting bracket is securely attached.
