RuggON PA-301, User Manual

Page: 34 / 61

P A - 3 0 1 U s e r ’ s G u i d e
32
2.2.1. Connect the Device to Power
The AC adapter provides external power source to your system and
charges the internal battery at the same time. The AC adapter has an
auto-switching design that can connect to any 100VAC ~ 240VAC power
outlets.
To connect the device to power:
1. Plug the AC adapter connector to the DC-jack socket.
2. Plug the power cord to the AC adapter.
3. Plug the other end of the power cord to a live wall outlet. The Power
LED on the front panel lights up.
NOTE: Make sure to use only the AC adapter and power cord that came
with the device, or one that is recommended and approved by the
manufacturer.
WARNING: Make sure the socket and any extension cord(s) you use can
support the total current load of all the connected devices.
WARNING: Before cleaning the system, make sure it is disconnected from
any external power source.