17
Installing/Removing the Wi-Fi Module
MT7000 supports Mini PCIe slot in full size for Wi-Fi radio card installation; it includes PCIe
and USB signal for Wi-Fi and Bluetooth combo card. The Wi-Fi module is pre-installed when
you order the MT7000. To install or remove the Wi-Fi module, please follow the guidelines
below.
Please make sure that the device is completely powered off and make
sure the power status LED light is off when removing Wi-Fi module.
1. Shut down the system properly and disconnect the device from all power sources.
2. Un-mount the device from the mounting apparatus; make sure that the display surface is
protected.
3. Open the service cover, locate the mini PCIe slot, and see the following image. (Note:
The factory default only supports full size mini PCIe slot, you must install an half-size
mini PCIe card adapter for an half size mini PCIe slot).
Full size Mini PCIe Card
