RuggedCom RuggedSwitch RSG2300, Installation Manual

Page: 41 / 52

RUGGEDCOM RSG2300
Installation Guide
Chapter 5
Technical Specifications
Fiber Optic Ethernet Port Specifications 31
• F51 transceivers are rated for -40 to 85 °C (-40 to 185 °F).
Connector Speed Duplex
e
Cable Type
f
Wiring
Standard
g
Maximum
Distance
h
Isolation
i
RJ45 10/100 Mbps FDX/HDX > CAT-5 TIA/EIA T568A/B 100 m (328 ft) 1.5 kV
RJ45 1000 Mbps FDX/HDX > CAT-5 TIA/EIA T568A/B 100 m (328 ft) 1.5 kV
e
Auto-Negotiating
f
Shielded or unshielded.
g
Auto-crossover and auto-polarity.
h
Typical distance. Dependent on the number of connectors and splices.
i
RMS 1 minute.
Section 5.5
Fiber Optic Ethernet Port Specifications
The following details the specifications for fiber Ethernet ports that can be ordered with the RUGGEDCOM
RSG2300.
10FL Ethernet Optical Specifications
Tx (dBm)
Mode
Connector
Type
Cable
Type (µm)
Tx λ (nm)
j
Minimum Maximum
Rx
Sensitivity
(dBm)
Rx
Saturation
(dBm)
Distance
(km)
k
Power
Budget
(dB)
MM ST 62.5/125 850 -16 -9 -34 -11.2 2 18
MM ST 50/125 850 -19.8 -12.8 -34 -11.2 2 14.2
j
Typical.
k
Typical distance. The maximum distance is greatly dependent on factors such as cable type, the number of connectors and number of splices. Consult a Siemens
sales associates when determining maximum distances.
Fast Ethernet (10/100 Mbps) Optical Specifications
Tx (dBm)
Mode
Connector
Type
Cable
Type (µm)
Tx λ (nm)
l
Minimum Maximum
Rx
Sensitivity
(dBm)
Rx
Saturation
(dBm)
Distance
(km)
m
Power
Budget
(dB)
MM ST 62.5/125 1300 -19 -14 -31 -14 2 12
MM ST 50/125 1300 -22.5 -14 -31 -14 2 8.5
MM ST 62.5/125 1300 -19 -14 -31 -14 2 12
MM ST 50/125 1300 -22.5 -14 -31 -14 2 8.5
MM SC 62.5/125 1300 -19 -14 -31 -14 2 12
MM SC 50/125 1300 -22.5 -14 -31 -14 2 8.5
MM MTRJ 62.5/125 1300 -19 -14 -31 -14 2 12
MM MTRJ 50/125 1300 -22.5 -14 -31 -14 2 8.5