background image

Copyright 

COPYRIGHT © 2008 RuggedCom Inc.  ALL RIGHTS RESERVED 

Dissemination or reproduction of this document, or evaluation and communication of its contents, is not 
authorized except where expressly permitted. Violations are liable for damages. All rights reserved, 
particularly for the purposes of patent application or trademark registration. 

This document contains proprietary information, which is protected by copyright. All rights are reserved. 
No part of this document may be photocopied, reproduced or translated to another language without 
the prior written consent of RuggedCom Inc. 

Disclaimer of liability 

We have checked the contents of this manual against the hardware and software described. However, 
deviations from the description cannot be completely ruled out. 

RuggedCom shall not be liable for any errors or omissions contained herein or for consequential 
damages in connection with the furnishing, performance, or use of this material. 

The information given in this document is reviewed regularly and any necessary corrections will be 
included in subsequent editions. We appreciate any suggested improvements. We reserve the right to 
make technical improvements without notice. 

Registered Trademarks 

RuggedSwitch™ and RuggedServer™ are registered trademarks of RuggedCom Inc. Other 
designations in this manual might be trademarks whose use by third parties for their own purposes 
would infringe the rights of the owner. 

 

Contacting RuggedCom 

 

Corporate Headquarters 

US Headquarters 

Europe Headquarters 

RuggedCom Inc. 
30 Whitmore Road 
Woodbridge, Ontario 
Canada, L4L 7Z4 
 
Tel: 

      (905) 856-5288 

Fax:        (905) 856-1995 
Toll-free:  1 (888) 264-0006 

RuggedCom 
1930 Harrison St., Suite-307 
Hollywood, Florida 
USA, 33020 
 
Tel: 

       (954) 922-7975 

Fax:         (954) 922-7984 
Toll-free:   1 (866) 922-7975 

RuggedCom 
Unit 41, Aztec Centre, 
Aztec West, Almondsbury, Bristol 
United Kingdom BS32 4TD 
 
Tel:   +44 1454 203 404 
Fax:  +44 1454 203 403 
 

Email: 

[email protected]

 

 

Technical Support 

Toll Free (North America): 

  1 (866) 922-7975 

International: 

  +1 

(905) 

856-5288

 

Email: 

[email protected]

 

 

Web: 

www.RuggedCom.com

 

Summary of Contents for RuggedSwitch i800






















Reviews: