TONE CODES
CHANGING TONE CODES
Press [
F
] + [
P5
] to get to the desired tone type: “T”, “T SQ”, “DCS”, or “SQ DCS”. “T” and
“DCS” are transmit side only. “T SQ” and “SQ DCS” are transmit and receive. Use the
channel knob to change tone codes. Press [
P5
] to save. Unless needed, use codes with
“SQ” in them. Our tone codes use the same chart and numbering system as listed in GMRS
charts. To remove all tone codes on a channel, press [
F
] + [
P5
], five times starting from the
channel display. To toggle between numbered tone codes [EX: 22] and actual tone codes
[EX:141.3], press [
P1
] when in tone code menu.*
*Only radios produced after March 1, 2022 (signified by a waterproof power connector) are equipped
with this feature.
22