Rugged Computing PC-XT1100, User Manual

Page: 29 / 45

XT1100 User Manual
17
Advanced Screen
This screen displays detailed
information on your current
connection and is where you can
adjust advanced settings.
• Wireless mode: You can
configure the type of wireless
mode here. Select either a
single (802.11 A only / 802.11 B
only) or mixed (802.11 B/G mix / 802.11 A/B/G mix) mode.
• B/G Protection: If the wireless mode you are using is
‘mixed’, you can select this to enable protection for your
connection. Select from Auto, On, or Off.
• Tx Rate: You can configure the Tx rate for your connection
here. Select from Auto, 1 Mbps, 2 Mbps, 5.5 Mbps, 6
Mbps, or 11 Mbps.
• Tx BURST: Select this option to enable Tx BURST.
• Enable TCP Window Size: Select this option to enable TCP
window size.
• Fast Roaming at ---: Select and enter a power value above
which fast roaming will be enabled.
• Select your Country Region Code: Select your country
region code for this connection. For information on this,
contact your system administrator.
• Enable CCX (Cisco Compatible eXtensions): Select and
configure these settings if you want to connect to a
Cisco-compatible system.
Tap Apply then OK to save all changes.
You must tap Apply to save any changes. If
you only tap OK, any changes you have made
will be lost.
Note