15
6
．
Setting scanning track
Method 1
：
1. Setting begin scanning track point
[SET] + [51] +
[
ENTER]
Adjust the position of Speed P/T which you need.
2.Setting finish scanning track point
：
[SET] + [52] +
[
ENTER]
Adjust the position of Speed P/T which you need.
3
．
Calling scanning
：
[51+ [ENTER]
Note: Setting begins and finishes scanning track point first.
4
．
Stop scanning
[52+ [ENTER]
(Move Joystick also can stop scanning
）
When Speed P/T scanning, default state following
a. Speed P/T scan between two points.
b. Scan “begin-point” and “end-point” and resort 3 seconds
c. If “begin-point” and “end-point” superpose, Speed P/T horizontal 360°rotation.
Method 2
：
Call scanning
[AUTO]+ [ON]
The Speed P/T scanning 360 degree. Need not to set the preset
point
7. Brush function
