14
number, and the camera will move the memorized position with all the preset
settings.
3.1 To set a preset position
SET + N + ENTER
N: the number of preset position: 1~128
3.2 To call a preset position
When camera positions have been set, you can enter a memorized camera
position number.
N + ENTER
N: the number of preset position: 1~128
4
.
Delete a preset position
[ [N] + [OFF]
N: the number of preset position: 1~128
5
.
To call cruise tracks
：
[32+[ENTER]
This command can call the No.1cruise tracks. It can scan preset points no.1 ~ 16.
[53+ [ENTER]
This command can call the No.2cruise tracks. It can scan preset points no.17 ~
31.
[49+ [ENTER]
This command can call the No.3cruise tracks. It can scan preset points no.33 ~
48.
[50+ [ENTER]
This command can call the No.1cruise tracks. It can scan preset points no.65 ~
80.
Note:
If some points are not been set or delete, it will not scanning these points
when cruising. Resort 3 seconds in every preset point.
