28
6.6.2. DISMOUNTING THE REAR WHEEL
»
Change gear to a position allowing the easy
access to the cable pull end on the Nfinity hub
interface.
»
Remove the cable pull ends provided with a
snapper or catch from the Nfinity hub inter-
face following steps 1, 2 and 3.
»
Loosen and/or remove the axle nut at both
side according to step 4.
»
Remove the chain from the chain tensioner,
see step 5, or for a belt drive, remove the belt
from the front pulley.
»
For chain drive systems, open the chain at
the chain lock, by pressing lightly against the
pulling direction, see step 6.
»
You can now remove the chain and take out
the rear wheel by moving and turning it
backwards.
MAINTENANCE
1
2
3
4
5
6
Summary of Contents for Ruffian
Page 1: ...1 ORIGINAL OPERATING MANUAL ...
Page 2: ...2 ...
Page 37: ...37 EC DECLARATION OF CONFORMITY 11 EC DECLARATION OF CONFORMITY ...
Page 39: ...39 NOTES ...