Ruff Cycles Ruffian, Original Operating Manual, Page: 13 / 40

13
Do not pull the saddle support from
the seat tube if you want to change
the saddle height. The front part must
lie flush with the upper tube. If you
pull out the saddle support, both the
support or the upper end of the seat
tube may break. A hazard of accident
or injury exists!
2.4. REMOVAL/INSTALLATION OF THE BATTERY
1. Loosen the lower cover of the tank with a
SW3 Allen key and remove it.
2. Removing the battery:
Before removing the battery, ensure that the
system is disconnected. Turn the key in the
lock by 1/4 rotation while tilting the battery
from the upper bracket.
3. Pull the battery from the bracket.
» Installing the battery:
Install the battery with its contacts onto the
lower bracket and tilt it up to the stop into the
upper bracket, until the lock snaps in audibly.
»
Remount the cover on the tank.
2.5. SWITCHING ON/OFF THE DRIVE
» Slide the supplied Intuvia board computer
onto the handlebar support.
»
Press shortly the ON/OFF switch on the
Intuvia.
COMMISSIONING
1
2
3