Ruff Cycles Ruffian, Original Operating Manual

Page: 23 / 40

23
5.2.3. ADJUSTING BRAKE LEVER DISTANCE
The brake lever distance setting should allow
to operate the brake lever by the first pha-
lanxes of both fingers positioned on the lever.
The lever width is adjusted with a T25 p-han-
dle Torx compatible wrench. For this purpose,
adjust the screw at the marked position 1.
6. MAINTENANCE
For a fully operational and save Pedelec, regular maintenance must be per-
formed. Before maintenance, please observe the following instructions.
Maintenance requires technical skills. You are responsible for the
correct maintenance of your Pedelec.
-> If you do not know how to perform this task, take your bike to a
specialist for maintenance.
A hazard of injury exists when the drive
system is switched on during maintenance
works! You hands may get caught between
the chain and chain ring during running
operation.
-> Remove the battery before performing
maintenance works. This ensures that the
drive systemis out of function.
During maintenance works a trapping and crushing risk exists. You
fingers can get caught by moving parts.
-> Be careful with your hands and when you work.
MAINTENANCE