T504 AP Installation Guide, 800-71032-001 Rev D
Rebooting and Factory-Resetting the CM
49
Rebooting and Factory-Resetting the CM
CAUTION!
Factory resetting returns the CM part of the T504 to its factory default settings.
NOTE
Before starting this procedure, you must first obtain the related MIBs from Ruckus Wireless.
Contact your authorized Ruckus Wireless sales representative or Ruckus Wireless Support. Visit
http://support.ruckuswireless.com/contacts
for Ruckus Wireless Support contact
information (login required).
1
Connect the administrative computer to the same network as the T504.
2
Start your MIB browser.
3
Load the Ruckus Wireless MIBs onto the MIB browser.
4
In the MIB browser, specify the IP address of the T504 access point or cable modem. (You can
obtain this information from the DHCP server on the network.)
5
Find the OID
1.3.6.1.4.1.25053.3.1.4.7.3
(ruckusZF7761CMControlLED).
6
Then do the following:
o
To soft reset the CM, set the value to
13
(softResetCM).
o
To hard reset the CM, set the value to
14
(powerCycleCM).
o
To factory-reset the CM, set the value to
15
(factoryResetCM).
You have completed resetting or factory-resetting the cable modem using SNMP.
Summary of Contents for ZoneFlex 901-T504-US31
