Ruckus Wireless SmartZone 100, Quick Setup Manual

Page: 4 / 4

Copyright © 2015 Ruckus Wireless, Inc.
Page 4 of 4
Published April 2015, Part Number 800-70904-001 Rev A
licenses.
Figure 10. Click + License
Figure 11. Enter the number of licenses to add in Qty to Add and
click Add License
s You have completed activating a SZ-100’s licenses.
Step 6: Sync the SZ-100 with LiMAN
After you have activated the SZ-100’s licenses on the Ruckus
Wireless Support Portal, the SZ-100 must be synced with the
Smart License server. This will enable the User’s ability to
assign licenses to and back from a SZ-100 or assign them to
another SZ-100.
To physically manage the distribution of licenses from the
Support Portal to the actual SZ-100, do one of the following:
• Connect the SZ-100 directly to the Internet. On the
SmartZone web interface, go to the
Administration > License page , and then click the Sync
License with Server button to sync the SZ-100 with the
SmartLicense server.
Figure 12. Sync the SZ-100 with the SmartLicense server
• Deploy a Ruckus Wireless Local License Server (LLS)
within your network. The LLS must be able to
communicate with your SZ-100 and it must be connected
to the Internet.
Contact Ruckus Wireless Support for
information on how to setup an LLS.
• In the event that the SZ-100 is disconnected from the
Internet and you have not deployed an LLS, you can
download the actual licenses from the Support Portal and
manually upload them to the specific SZ-100. See
Syncing
Licenses on an Offline SZ-100 .
You have completed activating the capacity or support license
for the SZ-100 device.
Syncing Licenses on an Offline SZ-100
#1 On the Add License page of LiMAN, click the SZ-100’s
serial number. The View Device page appears (see Figure
13 ).
Figure 13. The View Device page
#2
Click Download License File . The license file is saved to
the client.
#3 On the SZ-100 web interface, go to Administration >
License . In the Upload License section (see Figure 12 )
Figure 12), click the Browse button, and then select the
license file from your client to upload it to the SZ-100
#4
On the SZ-100 web interface, go to Administration >
License . In the Download License section, click the
Download button to download the license file from the SZ-
100 to your client.
#5
Go back to the LiMAN portal on the Ruckus Wireless
Support website, and then do the following:
a Go to the View Device page (see Figure 13 ).
b Click Upload License File .
c
Click the Choose File button (see Figure 14 ), and then
select the license file from your client.
d Click Send to complete the offline License
synchronization.
You have completed activating licenses on an offline SZ-100.
Figure 14. Click the Choose File button
Related Documentation
If you need more information about the SmartZone 100 or the
SmartLicense platform, refer to the following documents,
which are available for download on the Ruckus Wireless
Support website:
• For information on how to mount and install the SZ-100
and how to complete the essential configuration tasks,
refer to the
SmartZone 100 Getting Started Guide .
• For information on how to perform advanced configuration
tasks and AP management and monitoring, refer to the
SmartZone 100 Administrator Guide .
• For a complete list of documentation on the SmartZone
100, refer to the release notes.
• For more information on how to manage your SmartZone
100 licenses, refer to the
SmartLicense User Guide .
Copyright © 2015 Ruckus Wireless, Inc. All rights reserved. Ruckus, Ruckus
Wireless are trademarks of Ruckus Wireless, Inc. All other company and
product names mentioned in the documentation are held to be trademarked
(and registered) by the primary holders.