10
M5
f
f
1
2
F7
F5
f
f
1
2
F7
F5
!
!
i
!
i
F7
F5
1.
°C
f
f
2
1
!
i
F7
F5
1.
°C
f
f
2
1
English
Tel. +49 7930 9211-0 Fax +49 7930 9211-150
3. Delivery contents
Included in delivery depending on model type:
•
ETA K 600 V / ETA K 1200 V / ETA K 2400 V, Ventilation unit with heat recovery
•
2 x EC Fan
•
1 x panel filter M5
•
1 x panel filter F7
•
1 x remote control with control cable 10m
•
1 x main heater (Hot water coil or electrical heating coil depending on the type)
•
1 x counter cross-flow heat exchanger
•
1 x bypass flap with actuator
•
1 x assembly and operating manual
4. Product and Performance description
The ETA unit is a ventilation unit with integrated cross-flow heat exchanger for optimum heat recovery.
Integrated in the unit are large panel filter M5 / F7, warm water heating coil or electric heating coil (depen
-
ding on version) and control electronics. The device has a remote control for controlling and setting the
operating parameters. The high quality housing consists of a frameless sheet metal structure with smooth
internal and external walls. The housing is insulated with 40 mm mineral wool. The unit can be operated at
a constant volume. The Control using external sensors ensures the appropriate ventilation.
Data in detail:
•
Frameless casing manufactured from galvanized steel sheet.
•
Extractable counter cross-flow heat exchanger.
•
Hot water coil or electrical heating coil (depending on the type)
•
Extractable large panel filters M5 / F7.
•
Controller installed, wired, ready to plug in.
•
Main / Isolator switch
•
External control unit with control cable.
•
Protection class: in ceiling installation correct duct and cable connection, IPX4 (see 6.1. Permitted
installation positions).
Air filter (Panel Filter)
Filter class F7
Air filter (Panel Filter)
Filter class M5
Connection condensate drainage
Heat exchanger (Counter cross-
flow heat exchanger)
Bypass
Read the operating manual be
-
fore commissioning the product.
Connections for the
heating coils
•
Electricity warning (hazardous voltage)!
»
Failure to observe the hazard may result in death, injury or
damage to property.
→ Before performing any work on conductive parts, always
disconnect the unit completely from the electricity supply
and make sure that it cannot be switched back on again.
•
Never reach into the impeller or other rotating or moving
parts.
»
Failure to observe the hazard may lead to serious injury.
→ Work may only be performed once the impeller has come
to a complete halt.
•
Never clean the internal space with flowing water or a
high-pressure cleaner. Do not use aggressive or easily
flammable products for cleaning (impellers/housing).
→ Only use mild soapsuds. The impeller should be cleaned
with a cloth or brush.
•
General warning
»
Failure to observe the warnings may result in personal
injury and / or damage to property.
→ Unauthorized repairs may cause personal injury and / or
damage to property, in which case the manufacturer‘s
guarantee or warranty will not apply.
•
Caution! Burning hazard.
»
Failure to observe the hazard may result in personal injury
and/or damage to property.
→
Do not touch the surface until the motor and heater have
cooled.
•
Never reach into rotating or moving parts.
»
Failure to observe the hazard may lead to serious injury.
→ Work may only be performed once the impeller has come
to a complete halt.
!
!
!
!
!
!
!
!
!
!
!
Summary of Contents for ETA K 1200 V W
Page 59: ...59 English www ruck eu Notes ...
