VC-400LT/RT+ VDSL2 CO&CPE Router MANUAL Ver.B3
36
The screen contains the following detail:
Click "Browse" to select a specific file name in preparation upgrade the firmware.
Click APPLY to start the firmware update.
Notes:
1. If the machine firmware version is too old to be updated with the current firmware version of the
gap, after the firmware upgrade must be reset system to default to avoid the new features can
not use or system error.
2. “2.4.20_mvl31-ADM5120” of kernel version means the CPU number of an IC. # 1473 means a
serial number of records compiled firmware. The date means the date of the firmware is
compiled.
3. Please note VDSL2 CO ROUTER and VDSL2 CPE ROUTER firmware is different, so you can
not upgrade them with the same firmware.
7.2.3.3 Device Mode
The ADM5120 network processor used in the reference system is able to act as either
a switch or a router. Clicking on “Device Mode” on the left navigation bar allows the
user to change the mode of operation, as shown in the following figure.
Figure 7.2.3.3 Device Mode
Notes:
1. The default setting is in Switch(Bridge) mode, it is not necessary to change the setting in most
of the case. In situations, which devices (e.g. PC, Server, VoIP) connected to CPE requires
Router function. Hence, set the VDSL2 CO/CPE ROUTER on Router mode.
2. Switch(Bridge) mode can pass through any packet, include vlan packet.
7.2.3.4 System Status
To view system status, click on the “System Status” link in the left navigation bar. A
screen is displayed as shown in
Figure 7.2.3.4