User Manual
RTX Nexus ICE-III
Date:
2017-07-11
File
: Nice_user_manual.docx
Ref.:
LEH
Rev.
: 3.0
Page:
4
of
8
pages
This document and the information contained is property of RTX A/S, Denmark. Unauthorized copying is not allowed. The in-
formation in this document is believed to be correct at the time of writing. RTX A/S reserves the right at any time to change said
content, circuitry and specifications.
2 Introduction
2.1 About RTX Nexus ICE-III
RTX Nexus ICE-III is a target interface unit for the ARM’s Cortex-M or NSC’s CR16C ar-
chitectures. It enables you to debug software via the SWD or SDI+ interface pins.
RTX Nexus ICE-III unites 2-wire SWD, 1-wire JTAG (SDI+), UART and galvanic isolation
in a single box, providing the full functionality needed for both Dialog SC14xxx and
DA14xxx series processors.
The RTX Nexus ICE-III product comprises:
•
An interface unit that connects a USB port of a PC to the JTAG and/or UART inter-
faces of a processor that includes SWD or SDI+ debug capability.
•
A standard USB A to mini-B cable.
•
Software available from the download section at
https://www.rtx.dk/
.
•
The software package includes the following components:
- Virtual COM port driver
- Debugger interface driver
- a Dynamic Link Library (DLL) to use with the debugger
- the RTX Nexus Debugger
2.2 Availability
RTX Nexus ICE-III is available from RTX A/S. Contact RTX sales (
http://www.rtx.dk/
) for
pricing.
Software upgrades are available free of charge from the download section at
https://www.rtx.dk/
.
2.3 Compatibility
The UART is exposed as a standard COM port on the PC and can be used as any other COM
port.
The debugger interface can currently only be used with the RTX Nexus Debugger.
