SME VoIP Handset Guide 4.8
Proprietary and Confidential
Page | 28
When the registration that should be deregistered is selected, a warning message “Delete registration?” will be
displayed as seen above. The user then must accept by pressing the left softkey “Yes”, or the right softkey “No”
to cancel the operation.
6.4.4 Select PBX
In the “Select PBX” menu it is possible to select another PBX for the handset to use.
With this feature it is possible to connect the handset to another PBX than the one used by the base station
system. In this way, the handset can for example function on a PBX without being connected to a system of base
stations.
6.4.5 Easy registration
“Easy registration” is a new feature which enables the user to add new handsets without having to open the base
webpage. This means, that the user can physically enable the registration mode by booting/pressing the reset
button on the base station, or by using the “Easy registration” menu on the handset.
6.4.5.1 Register handsets
Once the base station is unpacked and powered on, it enters a registration mode for 120 seconds. In order to
establish a connection, the base station must be already provisioned with extension/SIP registration data for the
upcoming handsets. While the base is open for registration, the LED will blink, and the user should power on a
handset which has no current registration. A “registering” screen should be displayed after booting of the
handset is completed. Afterwards, it will automatically be registered to the base station. If the registration
process of 120 seconds has timed out, the user can easily restart the process by rebooting the base or by
unplugging/plugging the power connection. As soon as the first handset has been registered, the user may
continue adding handsets following the normal procedure mentioned below.
After having registered handset number one to the base station, the system now is up and running. There are
two ways of registering a second handset:
1.
Brand new RTX8431 -
In order to connect a second unpacked RTX8431 handset, the user should go to
the “Connectivity” menu and select the “Easy registration” feature. The system will enter the
registration mode and the user can then power on the new handset number two. The handset enters
immediately registration mode and after a moment, the it will be registered to the base station. The end
user will see a confirmation screen on both handsets number one and two, where the user can compare
if the IPEI match. After pressing “Okay”, the system opens again the registration window for 120
seconds where the user can add another handset.
