RTW PortaMonitor 10611X-VID, Operating Manual

Page: 53 / 86

PortaMonitor X-series Keys and Menus • Page 7-7
7.5.3. Submenu General
Serial-No Serial number display
Menu-Lock Enable/disable menu-lock-function.
-CODE Code selection to enable menu when menu-lock is
activated.
Codes:
1351, 4214, 2132, 6542, 4251, 6512, 4231, 4611
Standby Time value until dimming of backlight display after
input signal falls below an internal defined threshold:
10 Min, 60 Min, Off
Brightness Display brightness control in steps of 10 %:
30%, ..., 100%.
Opt1-Key Activating the analog/digital (A/D-Select) switching
via OPT1 key. None disables this function.
Opt2-Key Activating the Pair (Rout.Pair) switching via OPT2
key in the modes: vectorscope (Gonio), correlator,
2-Cha-PPM, 2-Cha+S+D-PPM and RTA. None
disables this function.
RTA-Option In 1062n/1064n activated: enabled is displayed
In 1061n/1063n the RTA option can be upgraded with
software module 13712.
Activation: Select this option, Press Nxt key, enter
the code number received from RTW.
Factory Recall the factory settings of the unit: set.
7.5.4. Submenu Vectorscope (for Gonio mode)
Grid Vectorscope display mode selection: L/R or M/S
AGC-Response Operation mode for vectorscope gain (Automatic Gain
Control): fast or slow
Display-Hold Vectorscope (Gonio) refresh rate: fast or slow
Color-VSC Color of the vectorscope display
-Grid Color of the vectorscope grid
-Label Color of the vectorscope labelling
7.5.5. Submenu Correlator
Corr Correlator display in VSC mode
(Vectorscope, Gonio) or with Lt/Rt in Surround mode:
On/Off
Mode Bar: the correlator is displayed as bargraph
Aux-Corr PAIR correlator display in 4-channel PPM mode:
On/Off
Response Ballistics: fast or slow
Color + Color for positive readings
Color 0 Color for display 0
Color – Color for negative readings
Color Grid Correlator grid color
See Chapter 7.3. OPT1
See Chapter 7.3. OPT2
In 1061n/1063n option with
software module 13712.
In 1062n/1064n active
Only available in 1063n/1064n,
but not in Surround mode!