RTW PortaMonitor 10611X-VID, Operating Manual

Page: 43 / 86

PortaMonitor X-series Getting started • Page 6-3
6.4. Safety symbols
The following symbols may be marked on the panels or covers of
equipment or modules, and are used in this manual:
WARNING! - This symbol alerts you to a potentially hazardous condition,
such as the presence of dangerous voltage that could pose a risk of
electrical shock. Refer to the accompanying Warning Label or Tag, and
exercise extreme caution.
ATTENTION! - This symbol allerts you to important operating
considerations or a potential operating condition that could damage
equipment. If you see this marked on equipment, consult the User´s
manual or Operator manual for precautionary instructions.
FUNCTIONAL EARTH TERMINAL - This symbol marks a terminal that is
electrically connected to a reference point and is intended to be earthed
for any functional purpose other than safety.
PROTECTIVE EARTH TERMINAL - This symbol marks a terminal that is
bonded to conductive parts of the instrument. Confirm that this terminal is
connected to an external protective earthing system.
6.5. Safety information
Please read this safety information before using the instrument:
Do not service or repair this product unless properly qualified. Servicing
should be peformed only by a qualified technician.
There are no user servicable parts inside the unit. Do not open the case
while the unit is connected to power. High voltage exists inside the
instrument.
The device has been designed for indoor use only.
Do not substitute parts or make any modifications without the written
approval of RTW. Doing so may create safety and EMI hazards.