RTS TBX - TriBus ADAM User Instructions Download Page 39

Page: 39 / 48

(A) Link Up/Dn Column

The

(A) Link Up/Dn

column displays the status of the links on the DBX port A.

Any of the following indicators may appear:

“—”

The link is down.

The link is up for # hops.

(A) Partner Column

The

(A) Partner

column displays frame number of the TBX card to which the connection is made. For example, if Frame 1’s

A connector is connected to Frame 2, a

appears under the (A) Partner column.

NOTE:

If there are multiple TBX-Tribus cards in a frame, use the slot number to determine the card connection being

used.

(B) Link Up/Dn Column

The

(B) Link Up/Dn

column displays the status of the links on the DBX port B.

Any of the following indicators may appear:

“—”

The link is disabled.

The link is active for # hops.

(B) Partner Column

The

(B) Partner

column displays frame number of the TBX card to which the connection is made. For example, if Frame 1’s

B connector is connected to Frame 2, a

appears under the (B) Partner column.

NOTE:

If there are multiple TBX-Tribus cards in a frame, use the slot number to determine the card connection being

used.

(C) Link Up/Dn Column

The

(C) Link Up/Dn

column displays the status of the links on the DBX port C.

Any of the following indicators may appear:

“—”

The link is disabled. If this is seen, the intercom ports were not configured correctly. See

“Configuration” on page 18 to read how to configure the ports.

The link is active for # hops.

(C) Partner Column

The

(C) Partner

column displays frame number of the TBX card to which the connection is made. For example, if Frame 1’s

C connector is connected to Frame 2, a

appears under the (C) Partner column.

NOTE:

If there are multiple TBX-Tribus cards in a frame, use the slot number to determine the card connection being

used.

Summary of Contents for TBX - TriBus ADAM

















































Search results

Summary of Contents for TBX - TriBus ADAM

Reviews:

Related manuals for TBX - TriBus ADAM

Brands by name

Popular brands

RTS TBX - TriBus ADAM, User Instructions

Search results

Summary of Contents for TBX - TriBus ADAM

Reviews:

Related manuals for TBX - TriBus ADAM

Brands by name

Popular brands