Innovating the Future of Global Communications
www.rtsintercoms.com
3
Rail Mounting
To
rail mount the ROAMEO AP-1800 access point
, do the
following:
1. Align the
mounting clamp in the Hand Rail Use Clamp
Position
on the bottom of the AP-1800.
2. Using the supplied screws from the clamp kit, attach the
mounting clamp to the AP-1800
.
3. Fit the
mounting clamp around the rail
you want to
mount the unit to.
4. Once in position, use the
larger adjustment knob to
tighten the clamp around the pole
.
Free-Standing Installation
Setting the AP-1800 unit on a table or shelf is commonly
referred to as free-standing installation. When using this
type of mounting, it is important to remember to position the
antennas perpendicurlar to the unit (antennas in the air) for the
best signal reception.
Mounting
Surface
Materials Used
Qty
Drywall
Drywall screws
4
Drywall anchors (as needed)
4
¼-inch (max.) Flat washer(as
needed)
4
Concrete
¼-inch (max.) Concrete screws
4
Concrete anchors (as required)
4
¼-inch (max.) Flat washer(as
needed)
4
Wood
¼-inch (max.) Wood screws
4
¼-inch (max.) Flat washer(as
needed)
4
Metal Surface
¼-inch (max.) Sheet metal
screws
4
¼-inch (max.) Flat washer(as
needed)
4
OR
Self-tapping or Self-drilling
sheet metal screws, ¼-inch
(max.)
4
OR
Machine screw, ¼-inch (max.)
4
Machine nut or drilled and
tapped holes
¼-inch (max.) Flat washer(as
needed)
4
Rack Frame
10-32 Rackmount Screws
2 to 4
¼-inch (max.) Flat washer(as
needed)
2 to 4
OR
10-32 Truss Head Rackmount
Screws
2 to 4.
Building Structure
Member (roof
trusses, etc)
¼-inch (max.) U-bolts
4
¼-inch (max.) Flat washer(as
needed)
4
¼-inch (max.) Machine nuts
4
OR
See Metal Surface Mounting
Use the larger
knob to tighten
the clamp in
place
