Innovating the Future of Global Communications
www.rtsintercoms.com
2
To
adjust the antennas for the best signal reception
when the access point is mounted horizontally
, do the
following:
• Carefully bend the
antenna 90° at the antenna joint
until the antennas are aligned straight up or down
.
Wall or Ceiling Mounting
To
wall
mount the ROAMEO AP-1800 access point
, do the
following:
1. Using the access point as a template and a pencil, mark
the
four (4) hole locations
on the wall or ceiling.
NOTE
:
It may be necessary to predrill the holes
or use screw anchors, depending on the
material of the wall.
2. Align the
AP-1800 in the position and placement
desired
.
3. Using a screw driver, drive the
screws into the
predefined holes
.
Pole Mounting
To
pole mount the ROAMEO AP-1800 access point
, do
the following:
1. Align the
mounting clamp in the Pole Use Clamp
Position
on the bottom of the AP-1800.
2. Using the supplied screws from the mounting kit, attach
the
mounting clamp to the AP-1800
.
3. Fit the
mounting clamp around the pole
desired.
4. Once in position, use the
adjustment knobs to tighten
the clamp around the pole
.
Use the larger
knob to tighten
the clamp in
place
