28
Service Menu
1.
While SET ADDR is displayed, tap the
Select control
.
ADDR 1 appears in the call waiting window
.
2.
Turn the
Select control
to display the desired logical keypanel address (ADDR 1 through ADDR 10), then tap the
Select control
.
The new setting is automatically saved, and after a few moments, the alphanumeric displays change from asterisks
(****) to dashes (----)
.
3.
Double-tap the
Select control
to return to the previous menu level.
OR
Press and hold the
Select control
for two (2) seconds to exit menu mode.
SERVICE, TEST PNL
TEST PNL
lets you check operation of indicators and controls.
When you select TEST PNL, the following sequence occurs:
a.
Percent (%) symbols appear on all alpha–numeric displays to verify operation.
b.
All tri-color indicators will flash green—yellow—red—off. All single-color indicators will flash
green-off. This verifies the operation of all indicators displays.
c.
The call waiting window will display TAP KEYS.
d.
If you tap
any intercom key
, the display above that key briefly displays OK.
If you turn either the SELECT or VOLUME control, the alphanumeric display above the control
increments or decrements by ones at each detente. If you tap the SELECT or VOLUME control, the
call waiting window displays OK. This verifies operation of all controls.
e.
Double-tap the
Select control
to return to the previous menu level.
OR
Press and hold the
Select control
for two (2) seconds to exit menu mode.
Summary of Contents for PAM-16
