5. Tap the PGM key.
6. Press a talk key.
The name of the ISO will appear in the alpha-numeric display above that talk key (on key-
panels so equipped).
☞
If a key will not accept an assignment, the ISO that you are trying to assign may have been restricted (not
enabled) by the intercom system configuration software. The intercom system configuration software can also
be used to restrict individual keypanel keys to prevent key assignments.
3.5.2.7
Assigning a Relay to a Key
The relay feature works with the 16 GPI outputs of an optional UIO-256 Universal Input / Output Frame. The
relay feature also works with the 8 GPI outputs of your intercom system (available at J27 on a Zeus Frame, J903
on an ADAM CS Frame, and J11 on the XCP-ADAM-MC Master Controller Breakout Panel in an ADAM Inter-
com System). You can assign a keypanel key to control a GPI output from any of these devices, and then use that
key and output to control an external device. For example, you could use a keypanel key to control lighting. Or,
you could assign a relay as a level 2 talk key assignment in a stacked talk key arrangement to both send audio and
key a device, such as a paging amplifier or a 2-way radio. To use a GPI output in a stacked talk key arrangement,
see See “Programming a Stacked Talk Key”, page
. To assign a GPI output as a standard key assignment, use
the following procedure:
1. Tap the FUNC key.
2. Tap the RELAY key.
3. If the relay is located in a remote intercom system, enter the intercom system number (5 in this example).
Otherwise, skip to step 4.
KP96/KP97 Keypanel Operation Manual, Ver. 8.3G
23
MULT
FUNC
0
PHONE
RELAY
4
PGM