Chipping, chisel and demolation applications
INSERTING SDS-MAX BITS
SDS-MAX accesories are used in your hammer drill.
Clean bits holder front cover and grease. Insert SDS-MAX, steel ball support.
Pull back the steel ball support and rotate the steel ball support by depressing until SDS-
MAX bit will be fitted. Pull the bit to check if it is locked to holder.
In hammering function, when the bit is locked in holder, it needs to move a few
centimeters as axial.
MAINTENANCE AND CLEANING
Before any work on the machine itself, pull the mains plug.
For safe and proper working, always keep the machine and the ventilation slots clean.
If the machine has accumulative worked 40 hours or drilled more than 2000 holes, or find that
impact force isn’t big, to keep machine working normally, please use the Grease which
provided by manufacturer, add it into the cylinder, it can prolong the life of machine.
If the machine should happen to fail despite the care taken in manufacture and testing, repair should be
carried out by an authorized customer services agent for
RTRMAX power tools
.
Summary of Contents for RTM240
