RTRMAX RTM240, Original User Manual

Page: 4 / 10

or medication. A moment of inattention while operating power tools may result in serious
personal injury.

Keep the tools out of reach of children.

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool.

Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventative safety measures reduce the risk of starting
the power tools accidentally.

Never use the cord for carrying, pulling or unplugging the power tool.

Don’t switch off the tool when it is on load.

Keep work area clean and well lit. Cluttered and dark areas invite accidents.

Avoid the anormal body moving, when operating the tools.

Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carry
power tools with your finger on the switch or plugging in power tools that have the switch on
invites accidents.

Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
SIDE HANDLE
Use the side handle, during drill.
OPERATING
Always use the correct supply voltage.
The voltage of the power source must agree with the value given on the nameplate of the machine.
Machines designated for 230V can also be operated with 220V.
SWITCH ON/OFF
Switching on: Press the on- off switch
Switching off: Release the on- off switch .
OPERATING MODE:
This hammer drill canbe used as listed below:
Hammer drilling:
In concrete or wall stone
Hammering: