Installation & Operation
It’s Under Control
®
VHR-1x
HDBaseT Class B Receiver
VHR-1X DESCRIPTION
B
A
D
E
F
C
RECEIVER
VHR-1x
CLASS B
OUTPUT
RX
TX
INPU
T
LINK
POWER
No.
Name
Function
A
HDBaseT Link LED
Solid orange LED above the port indicates a secure HDBaseT link
B
HDBaseT Input
Connect category cable between this port and the VHT-1x
Transmitter (or compatible HDBaseT Matrix Switch or Transmitter)
C
HDBaseT Power LED
Solid green LED above HDBaseT port indicates power over HDBaseT
D
Infrared TX
IR is transmitted out to control display device (optional)
E
HDMI Output
Connect an HDMI cable between this port and the display device
F
Infrared RX
Connect IR Receiver (see diagram)
INFRARED CONTROL
The VHR-1x and VHT-1x provide bi-directional infrared transmission for control of the video source and
display. The infrared commands received by a VHT-1x or VHR-1x (RX input) will be delivered over the
HDBaseT cable to the TX output of the other device, where an emitter can be connected and installed on
the device being controlled.
Video Source IR Control
An RTI control system may be used for control of the video source directly. Alternatively, IR control of the
video source may be sent to an infrared receiver mounted on the display and passed through the VHR-1x
to the VHT-1x. Plug the IR emitter to the TX Out and install the emitter over the source’s IR sensor.
NOTE: The IR receiver should be mounted underneath the display (TV) with the smallest end forward and
the sticky pad affixed upwards. (NOTE:
IR Receiver is square with a shiny surface).
Display IR Control
An RTI control system may be used for control of the display directly. Alternatively, IR control of the
video source may be passed through the VHT-1x to the VHR-1x. Plug the IR emitter to the VHR-1x TX
Out and install the emitter over the display’s IR sensor.
Product Contents
Contents within the box include the following items:
VHR-1x HDBaseT Class B Receiver
Infrared Blaster Cable Pack (TX/RX Pack)
Reference Guide
INITIAL SETUP
•
Connect a single CAT5e/6/7 cable between the VHR-1x Receiver and a compatible Matrix Switch or
Transmitter using the HDBaseT ports.
•
Connect HDMI cable between the Matrix Switch or Transmitter’s HDMI Input and video source (e.g.
blu-ray player).
•
Connect HDMI cable between the Receiver’s HDMI Output and the display device (e.g. LCD TV).
•
Connect IR receiver for control of the video source (optional).
•
Connect IR emitter for control of the display.
•
Connect the power supply to the Transmitter - VHT-1x or compatible Matrix Switch (e.g. VHD-4x).
•
Check the LEDs on the Receiver and Transmitter to ensure correct installation and connection:
- The Orange LED will illuminate when connected to a video link.
- The Green LED will illuminate when the device is connected to the power supply.
TELEVISION
HDBaseT CLASS B LITE EXTENDER SET
SOURCE
DEVICE
Video Source
IR Control via HDBaseT
or
RTI control system
Connection Diagram - VHR-1x with VHD-4x Matrix Switch
Display
IR Control via HDBaseT
or
RTI control system
IR Receiver - For control of
the video source
Connection Diagram - VHR-1x with VHT-1x