RTI TheaterTouch T2 User'S Manual And Programming Manual Download Page 52

Page: 52 / 118

TheaterTouch System Controller

HOW TO DELETE A MACRO

To delete a macro from a button:

1. Select

the

Delete Macro

tool

from the

Tool Palette

2. Place the mouse cursor over the button with the macro you wish to delete.

3. Click the left mouse button.

HOW TO EDIT AN IR COMMAND IN A MACRO

1. To edit an individual command in a macro you must have the macro

displayed in the Macro Editor.

2. Double click on the command in the macro you want to edit to open the

Edit Infrared Command

dialog box.

Note:

Not all of the controls will be available simultaneously. Only the options

relevant to the default settings and command being edited will be shown.

Summary of Contents for TheaterTouch T2























































































































Search results

Summary of Contents for TheaterTouch T2

Reviews:

Related manuals for TheaterTouch T2

Brands by name

Popular brands

RTI TheaterTouch T2, User'S Manual And Programming Manual

Search results

Summary of Contents for TheaterTouch T2

Reviews:

Related manuals for TheaterTouch T2

Brands by name

Popular brands