Universal System Controller
T2-Cs+
14
BATTERY AND DOCKING STATION
The T2-Cs+ uses a Lithium-Ion rechargeable battery. This battery does not
exhibit any type of “Memory Effect” from being charged too often. Since
the T2-Cs+ can safely be charged after each use, a docking station is
included for convenience. If left out of the docking station, the T2-Cs+ will
remain in sleep mode for 1 – 2 months before shutting down. At that point
the battery must be recharged.
The T2-Cs+ Docking Station can be placed on a flat surface such as a shelf
or table, or it can be mounted to a wall using the mounting holes on the
back of the unit.
If the T2-Cs+ battery capacity is reduced to approximately
25 percent, a low battery icon will appear in the top center
of the display.
The low battery icon will change color to red if the battery
capacity becomes critically low. At this point the T2-Cs+
must be placed into the docking station to recharge the
battery.
The docking station LED illuminates red to indicate a charge in progress.
The LED will illuminate blue when the battery in the unit is fully charged
or does not need to be charged. A fully discharged battery will take
approximately 2-4 hours to completely re-charge. The T2-Cs+ can remain
in the docking station indefinitely without damage to the battery.
CHAPTER
2 | INTRODUCTION
