![background image](http://html1.mh-extra.com/html/rti/scatter-probe/scatter-probe_manual_1497718018.webp)
Measure
2021.5B
RTI Scatter Probe User's Manual
18
Notice:
The displayed values after end of measurement for Air Kerma (Gy) and Ambient Dose Equivalent H*(10) (Sv) represent the
integrated radiation from start to stop of measurement.
The peak rate (Air Kerma rate and H*(10) rate) parameters show the highest identified value between start and stop of
measurement.
The rest of the parameters (rate, mean energy, HVL) show the values from the last complete two-second period. I.e. a time
frame slightly before end of measure.
If the measuring time is shorter than two seconds, all displayed values will represent the entire measurement.
Free-run (Manual trig on and off)
When the irradiation rate is expected to be below 5 µGy/h (or 10 µSv/h), Free-run or Timed Mode i recommended. The Scatter
Probe will then be manually trigged by the user.
Assuming that the instruction for
The first measurement
above is followed until the measurement screen is open (point #8).
1. Go to Meter Settings.
2. Select measuring mode -
Free-run
.
3. Press the Meter settings icon to get back to the measurement screen.
Summary of Contents for Scatter Probe
