RTI RP-6, Operations & Installation Manual

Page: 12 / 30

RP-6 Remote Control Processor
6
RP-6 REMOVABLE HEADER TERMINAL DESCRIPTION
TERMINAL NAME DESCRIPTION
+12VDC
Positive power supply connection. It is
internally tied to the Power jack. This can be
used to power external IR or RF receivers, or
fed into one side of a relay to create a trigger
voltage output.
GROUND
Common ground connection. Use this ground
reference for any device that is connected to
the +12VDC, GROUND, SIGNAL IN, OR
HIGH OUT terminals.
SIGNAL IN
Input connection for system trigger codes.
This should be connected to a RTI RF receiver
or industry standard IR repeater system. The
signal voltage can be from 3VDC – 12VDC.
HIGH OUT
High current (200mA) IR output connection.
This can be used to power up to 10 infrared
mini-emitters, an IR blaster, or extending IR
control over a long distance (1000 ft. max).
CONTACT A
Relay contact connection. Each of the three
relays has two contact terminals (A & B). The
relays can each switch loads up to 3A/30VDC
and are software selectable to be either
normally open or normally closed.
CONTACT B
Relay contact connection. Each of the three
relays has two contact terminals (A & B). The
relays can each switch loads up to 3A/30VDC
and are software selectable to be either
normally open or normally closed.