Manual: RTI NEO ONE
page 12 / 48
6.
Settings at the device / data entry wheel
By pressing the data wheel once, you will enter the
function menu
. To change the func-
tion mode turn the data wheel left / right.
IMPORTANT: After changing the function mode, you will have to remove the RTI NEO ONE
from the mains to save your settings! Plug the device back in to start with the desired
function mode.
Following modes are selectable:
FUNCTION MODES
a) The RTI NEO ONE is
controlled via DMX
; X- and Y-axis are displayed normally
b) The RTI NEO ONE is
controlled via DMX
; X-axis is displayed normally, Y-axis is inverted
c) The RTI NEO ONE is
controlled via DMX
; X- and Y-axis are exchanged with each other
d) The RTI NEO ONE is
controlled via DMX
; X- and Y-axis are exchanged, X is inverted
e) The RTI NEO ONE is
controlled via DMX
and uses only 11 instead of 13 channels
