5 |
P a g e
01/2019
RTI | Miravue VIP-1 Manual
USB1-2
USB port is used for firmware updates (via USB thumb drive), an extra LAN port when needed (via USB to RJ45
dongle), and keyboard input (not KVM). Valid keys (select, up, down, left, right) to display and navigate the on-
screen list of available sources.
2)
VIP-1 Rear Panel Ports
HDMI-IN
Connects to a video source (cable/satellite receiver, Blu-ray player, Apple TV, Fire TV, Roku). Refer to website
for supported video resolutions, audio formats, and HDMI/HDCP devices.
HDMI-OUT
Connects directly to a video display (e.g., TV or projector) or to an HDMI passthrough device (e.g., Soundbar, AV
Receiver) and then to the video display. Refer to website for supported video resolutions, audio formats, and
HDMI/HDCP devices.
STEREO
Connects to an external device's stereo audio-in port (e.g., TV, Soundbar, audio matrix). This downmixed (when
applicable) analog stream can be delayed for lip sync adjust for either the video source or the video display, but
not both. NOTE: Audio settings are configured via the VIP-1 web interface.
IR-IN
Infrared input for infrared control of the VIP-1 using an infrared receiver (purchased separately).
IMPORTANT NOTES:
•
The VIP-1 IR-IN input is not compatible with IR delivered using a hard-wired cable directly from an RTI
control processor.
•
IR passthrough is not supported.
•
The built-in IR eye on the front panel is disabled when this jack is in use.
