12 |
P a g e
01/2019
RTI | Miravue VIP-1 Manual
5)
Configure VIP-1 Driver Properties
Once all VIP-1 devices are added, you must configure the driver properties before continuing. Select the
Miravue driver from the driver section of the system tree and select “driver properties.” Enter the settings
required for each VIP-1 (described below). Refer to the “Driver Info” tab for additional configuration details.
Connection Type:
Network (TCP)
Network:
User has the option of UPnP (Serial Number), UPNP (Friendly Name), or Static Entry (IP Address)
TCP Port:
Default is set to 80
Transceiver Count:
Enter the transceiver count to match the number of Miravue units in your project file. This
will open configuration options for all your devices.
