13 |
P a g e
01/2019
RTI | Miravue VIP-1 Manual
Send Configuration to Device:
This checkbox allows the integrator to decide if sending an update to a
particular VIP-1 is necessary. In the event an update is needed for only one VIP-1, unchecking this box will
prevent units from needing to reboot.
Display Name:
Name that is to appear in the web application, the main miravue screen, and the name that is
associated with the variable “Name”.
Source Connected:
This checkbox asserts that a source is connected to the “HDMI IN” connection of the VIP-1
when checked.
Source Name:
Source name that is to appear in web application, in the main miravue screen, as well as the
name that is associated to the variable “Local Source Name”.
Transmit Mode:
User may choose between “Unicast” and “Multicast” depending on the system configuration.
See “Unicast vs. Multicast Transmit Modes” for important information.
Transmit Group ID:
Make sure all VIP-1 units in the system use the same ID. This becomes increasingly
important when multiple systems are in the same network.
Receive Group ID:
Make sure all VIP-1 units in the system use the same ID. This becomes increasingly
important when multiple systems are in the same network.
Network Discovery:
The option presented here is dependent on what was selected in the “Network” portion
of the configuration under “Connection”. If “Serial Number” then enter the serial number. If “Friendly Name”
then enter the friendly name. If “Static Entry” then enter that IP Address assigned to the VIP-1 unit.
