Installation & Operation
IPE-4
The IPE-4 IR port expander, when used with RTI control processors, provides unsur-
passed infrared expansion. With sturdy steel construction, the IPE-4 is compatible with
most industry-standard IR emitters, and is designed to function without a power supply.
A three (3) foot cable for connection to RTI processors is included.
NOTE:
• All four (4) IR output ports may not be usable if dual or flashing emitters are
used.
• The IR output level on the RTI processor IR port should be set to maximum.
• Simultaneously connecting different types or brands of IR emitters to the
IPE-4 output ports is not recommended. Use of same-brand emitters is
recommended.
Mounting Ear Screw Holes (4)
IR In Port
IR Out Ports (4)
Mounting Ears
The IPE-4 can be wall mounted (details below) or free standing.
Mounting Instructions
1
Level and anchor the IPE-4 to desired wall, shelf, or cabinet
by aligning the four (4) #10-32 3/4” flathead screws
(included) with the screw holes located on the front of the
IPE-4 mounting ears and securely fastening each screw.
2
When mounting the IPE-4, be certain to choose a safe
location (e.g. away from electrical junction boxes, circuit
breakers, wet locations, etc.)
Mounting
1.4
Inches
4.5 Inches
IR Port Expander
Quick Reference Guide
It’s Under Control
®
