![background image](http://html1.mh-extra.com/html/rti/cobia-flex-r-f/cobia-flex-r-f_user-manual_1497669016.webp)
Cobia Flex R/F - User Manual 2014.3A
16
mAs.
Do NOT use the Cobia Internal MAS in contact with a patient.
Do NOT use Cobia Internal MAS on a circuit with a voltage higher than
90 V DC or 600 V AC.
Do NOT expose the instrument to direct sunlight, extremes of
temperature and humidity, or dew fall.
Do NOT exceed maximum tube current input (1000 mA).
Note!
The Cobia Internal MAS is intended for service and quality
control of diagnostic X-ray equipment. It is not intended for
use during diagnostic examinations of patients.
RTI Electronics AB takes no responsibility for misuse of the Cobia Internal
MAS or use together with products that the Cobia Internal MAS is not
intended for.
RTI Electronics AB assumes no responsibility in case of customers not
following these safety precautions.
4
Maintenance
4.1
Scheduled Calibration
RTI recommends that the Cobia is recalibrated every 24 months. Send your
Cobia to your local RTI distributor, who will send it to our service
department in Mölndal, Sweden, or New Jersey, USA. For contact details,
please see the back of this manual or the list of local RTI distributors on the
RTI website (
www.rti.se)
.
4.2
Updating the System
Updates can be performed by the user. The system firmware or software is
updated by downloading the latest versions from
www.rti.se/downloads
.
Instructions are included in the download or can be found in the reference
manual.