background image

 

WLAN17202ER User's Manual 

 1 

RTD Embedded Technologies, Inc. 

Introduction 

Product Overview 

The WLAN17202ER is designed to provide wireless communication for PC/104-

Plus

 and PCI-104 based 

systems.  It communicates via the standard 802.11a/b/g protocols.  The WLAN17202ER can be used to 
connect multiple PC systems together.  The WLAN17202ER uses the 5004 MP Atheros 4G Mini-PCI 
module from Netgate.  This module is connected to the PC/104 PCI bus through a Mini-PCI connector 
and special circuitry to allow for compatibility with either 3.3V or 5V PCI signaling.   

Board Features 

o

  PC/104 PCI and ISA stack through busses 

o

  5004 MP Atheros 4G Mini-PCI module 

o

  Atheros AR5004X Client Chipset 

o

  Supports IEEE 802.11a, 80211b, 802.11g protocols 

o

  Two MCX Jacks for dual antennas 

o

  Structural support system for the Mini-PCI module to increase ruggedness. 

o

  Needs only +5V input power 

 

THE WLAN17202ER IS AN EMBEDDED MODULE WHICH IS INTENDENDED TO BE 
INTEGRATED INTO A FINAL SYSTEM.  IT PROVIDES POWER, ANTENNA ACCESS, AND 
STRUCTURAL SUPPORT FOR RUGGED SYSTEMS.  IT IS INCUMBENT ON THE USER TO 
OBTAIN ANY CERTIFICATIONS WHICH MAY BE REQUIRED FOR OPERATION WHEN 
INTEGRATED INTO ITS FINAL APPLICATION.  THE ONLY CURRENT CERTIFICATIONS 
WHICH MAY RELATE TO THIS MODULE ARE THE ONES WHICH HAVE BEEN OBTAINED 
FOR THE 5004 MP ATHEROS 4G MINI-PCI MODULE FROM NETGATE. 
 

PCI Interface 

o

  Supports 3.3V and 5.0V PCI Signaling 

o

  User-selectable PCI Slot Number 

Physical Attributes 

o

  Size:  3.6”L x 3.8”W x 0.6”H (90mm L x 96mm W x 15mm H) 

o

  Weight:  Approximately 0.18 lbs (0.08 Kg) 

o

  Operating Temperature: 

   0

o

 C to +70

o

 C  

o

 Storage 

Temperature: 

-20

o

 C to +80

o

 C 

o

  Power Requirements @ +5 VDC: 

     802.11a 

 802.11b 

 802.11g

 

FTP Tx :  

 

1.39 W   

1.43 W   

1.35 W 

FTP Rx :  

 

0.99 W   

1.02 W   

1.02 W 

Standby mode: 

 

0.86 W   

0.83 W   

0.89 W 

Power saving mode: 

0.17 W   

0.17 W   

0.17 W 

RF Kill :   

 

0.13 W   

0.13 W   

0.13 W 

Summary of Contents for WLAN17202ER


















Reviews: