background image

 

WLAN17202ER User's Manual 

 12 

RTD Embedded Technologies, Inc. 

Limited Warranty 

 

RTD Embedded Technologies, Inc. warrants the hardware and software products it manufactures and 
produces to be free from defects in materials and workmanship for one year following the date of ship-
ment from RTD EMBEDDED TECHNOLOGIES, INC. This warranty is limited to the original purchaser of 
product and is not transferable. 

During the one year warranty period, RTD EMBEDDED TECHNOLOGIES will repair or replace, at its op-
tion, any defective products or parts at no additional charge, provided that the product is returned, 
shipping prepaid, to RTD EMBEDDED TECHNOLOGIES. All replaced parts and products become the 
property of RTD EMBEDDED TECHNOLOGIES. Before returning any product for repair, customers are 
required to contact the factory for an RMA number. 

THIS LIMITED WARRANTY DOES NOT EXTEND TO ANY PRODUCTS WHICH HAVE BEEN 
DAMAGED AS A RESULT OF ACCIDENT, MISUSE, ABUSE (such as: use of incorrect input voltages, 
improper or insufficient ventilation, failure to follow the operating instructions that are provided by RTD 
EMBEDDED TECHNOLOGIES, "acts of God" or other contingencies beyond the control of RTD 
EMBEDDED TECHNOLOGIES), OR AS A RESULT OF SERVICE OR MODIFICATION BY ANYONE 
OTHER THAN RTD EMBEDDED TECHNOLOGIES. EXCEPT AS EXPRESSLY SET FORTH ABOVE, 
NO OTHER WARRANTIES ARE EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, 
AND RTD EMBEDDED TECHNOLOGIES EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED 
HEREIN. ALL IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES FOR MECHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS 
WARRANTY. IN THE EVENT THE PRODUCT IS NOT FREE FROM DEFECTS AS WARRANTED 
ABOVE, THE PURCHASER'S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT AS PROVIDED 
ABOVE. UNDER NO CIRCUMSTANCES WILL RTD EMBEDDED TECHNOLOGIES BE LIABLE TO THE 
PURCHASER OR ANY USER FOR ANY DAMAGES, INCLUDING ANY INCIDENTAL OR 
CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST SAVINGS, OR OTHER DAMAGES 
ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT. 

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR 
CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS AND SOME STATES DO NOT ALLOW 
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR 
EXCLUSIONS MAY NOT APPLY TO YOU. 

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER 
RIGHTS WHICH VARY FROM STATE TO STATE. 

  

Summary of Contents for WLAN17202ER


















Reviews: