74 CML24BT cpuModule
BDM-610000084 Rev B
Jumper Settings and Locations
Many cpuModule options are configured by positioning jumpers. Jumpers are labeled on the board as
JP
followed by a number.
Figure 7 shows the jumper locations that are used to configure the cpuModule. Table 53 lists the jumpers and
their settings.
Figure 7 CML24BT Jumper Locations (top side)
Table 53 CML24BT Jumpers
Jumper
Pins
Function
Default
JP5
2
Reserved
open
JP6
2
Reserved
open
JP5 + JP6
2
Used to configure serial port connector
CN7
as single RS-232, and sends
the POST codes on the transmit pin. See
Serial Power-On-Self-Test (POST)
Code Output
on page 71
pins 1–2 ( JP5 and JP6)
: Enable POST Codes over Serial Port
CN7
open
: Normal operation
open
JP6
JP5
Summary of Contents for CML24BT cpuModules
