32
CMX32M cpuModule
BDM-610000075
Rev B
SATA Disk Chip Socket (U6)
The SATA Disk Chip socket is an 18-pin socket in a 32-pin format that supports miniature SATA flash disk chips.
The socket allows a true SATA device to be attached to the board with either a socketed or soldered connection.
Such devices are supported by all major operating systems, and do not require special drivers.
Installing and Configuring the SATA Disk Chip
To ensure proper installation of the SATA Disk Chip, follow the following configuration steps:
1.
Always work at an ESD protected workstation, and wear a grounded wrist-strap.
2.
Remove power from the system
3.
Insert the Disk Chip in the SATA Disk Chip Socket (
U6
) aligning pin 1 with the square solder pad on the
board.
4.
Apply power to the system.
5.
Re-enter the BIOS and set the boot order of the system accordingly.
Table 14
SATA Disk Chip Socket (U6)
1
1. TX and RX are the transmit and receive respectively of the Disk Chip.
Pin
Signal
Pin
Signal
1
GND
32
Vcc (3.3V)
2
RX+
31
GND
3
RX-
30
n.c.
4
GND
29
n.c.
5
TX-
28
n.c.
6
TX+
27
n.c.
7
GND
26
Reserved
8
no pin
25
no pin
9
no pin
24
no pin
10
no pin
23
no pin
11
no pin
22
no pin
12
no pin
21
no pin
13
no pin
20
no pin
14
no pin
19
no pin
15
Reserved
18
Reserved
16
n.c.
17
GND
Summary of Contents for BDM-610000075
