rtd BDM-610000049, User Manual

Page: 87 / 120

BDM-610000049 Rev G Chapter 4: Using the cpuModule 77
Reset Status Register
The cpuModule has several different signals on board which can cause a system reset. If a reset occurs, the reset
status register can be used to see which reset or resets have been asserted on the cpuModule.
The user has the ability to see which resets have been asserted. Resets can also be cleared.
•
Examine Resets : Reading from I/O port 0x457 will indicate if a reset has been asserted. If a 1 is read, the
corresponding reset has been asserted. If a 0 is read from the bit, the reset has not been asserted
•
Clear Reset : Each reset can be cleared by writing a 1 to the selected bit of I/O port 0x457.
Main Power (+5V)
1 = reset asserted
0 = no reset
Non-Standby Power
1 = reset asserted
0 = no reset
Standby Power
1 = reset asserted
0 = no reset
PCI Reset
1 = reset asserted
0 = no reset
CPU Core Power
1 = reset asserted
0 = no reset
Memory Power
1 = reset asserted
0 = no reset
Reserved Utility Reset
1 = reset asserted
0 = no reset
Table 57 Reset Status I/O Address 457h - Read Access
D7 D6 D5 D4 D3 D2 D1 D0
Main Power (+5V)
1 = clear reset
Non-Standby Power
1 = clear reset
Standby Power
1 = clear reset
PCI Reset
1 = clear reset
CPU Core Power
1 = clear reset
Memory Power
1 = clear reset
Reserved Utility Reset
1 = clear reset
Table 58 Reset Status I/O Address 457h - Write Access
D7 D6 D5 D4 D3 D2 D1 D0