RTC SME ICE 500 Instruction Manual Download Page 4

-         6 -

-         7 -

INSTRUCTION MANUAL          SME ICE 500          STAINLIEE STEEL BLENDER

Dear customer,

Please read these operating instructions through carefully before connecting your device to the mains, in 

order to avoid damage due to incorrect use. Please pay particular attention to the safety information. If you 

pass the device on to a third party, these operating instructions must also be handed over.

PARTS DESCRIPTION

•  InnEr coVEr

•  LID

•  GLASS juG

•  SEALInG rInG

•  cuTTInG BLADE

•  cuP BASE

•  MoTor BLocK

•  roTAry SWITch

•  juG ASSEMBLy

•  rInG

Technical information

Voltage/frequency:  

220 V   

50/60 Hz     800 W

Glass jug capacity:  

1.5 liters  

KB=3 MIN

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should

always be followed including the following:

1.  Read all instructions before using.

2.  To protect against risk of electrical shock do not put the unit in water or other liquid.

3.  Close supervision is necessary when any appliance is used by or near children.

4.  Unplug from outlet not in use, before putting on or taking off parts, and before cleaning.

5.  Avoid contacting moving parts.

6.  This appliance has a polarized plug. To reduce the risk of electric shock, this plug will be fit in a 

polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does 

not fit, contact a qualified electrician. Do not modify the plug in any way.

7.  Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or is 

dropped or damaged in any manner. Return appliance to the nearest authorized service facility for 

examination, repair or mechanical adjustment.

8.  The use of attachments, including canning jars, not recommended by the manufacturer may cause a 

risk of injury to persons.

9.  Do not use outdoors.

10. Do not let cord hang over edge of a table or counter.

11. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons 

or damage to the blender. A scraper may be used but must be used only when the blender is not 

running.

12. Blades are sharp. Handle carefully.

13. To reduce the risk of injury, never place cutter-assembly blades on base without jar properly attached.

14. Be certain cover is securely locked in place before operating appliance.

15. Always operate blender with cover in place.

16. When blending hot liquids, remove center piece of two-piece cover.

17. Don‘t switch on the appliance without any food or water.

18. Do not use appliance for other than intended use.

19. Keep electrical appliances out of reach from children or infirm person. Do not let them use the 

appliances without supervision

GENERAL SAFETy INSTRUCTIONS

Read the operating instructions carefully before putting the appliance into operation and keep the 

instructions including the receipt and, if possible, the box with the inner packing. 

If you pass this appliance on to third parties, please also pass on the operating instructions.

•  The appliance is designed exclusively for private use and for the intended purpose. This appliance is 

not intended for commercial use. Do not use it outdoors (unless it is designed to be used outdoors). 

Keep it away from sources of heat, direct sunlight, moisture (never submerge it in any liquid) and 

sharp edges. Do not use the appliance with wet hands. If the appliance gets moist or wet, unplug it 

immediately.

•.  Turn the appliance off and disconnect it from the mains supply (pull the plug, not the cable) if the 

appliance is not being used, if accessories are attached or removed or if there is a malfunction. 

•.  Do not operate the machine without supervision. If you leave the workplace, always switch the 

appliance off or disconnect it from the mains supply (pull the plug, not the cable).

•.  check the appliance and the cable for damage regularly. Do not use the appliance if it is damaged.

•  Do not attempt to repair the appliance yourself. Always contact a qualified technician. To avoid 

hazards, a defective cable may only be replaced by the manufacturer, our customer service or a 

qualified person by an equivalent cable.

•  use only original accessories.

•  Please note the following “Special Safety Instructions“.

CHILDREN AND FRAIL INDIVIDUALS

•  In order to ensure your children‘s safety, please keep all packaging (plastic bags, boxes, Styrofoam, 

etc.) out of their reach.

 

Caution! Do not allow small children to play with foil.

 

Danger of suffocation!

•  In order to protect children or frail individuals from the hazards of electrical equipment, please ensure 

that this appliance is only used under supervision. This appliance is not a toy. Do not allow small 

children to play with it.

SAVE THESE INSTRUCTIONS

Before first use

•  o All parts of the blender are to be thoroughly cleaned before being used for the first time. (See 

section: Cleaning).

•  o Take out the required length of cable from the cable tidy on the base of the blender and connect the 

device to the mains supply.

Assembly of the Glass jug

1.  Put the rubber sealing ring (4) on the inner edge of the blade unit(5).

2.  Put the blade unit with sealing ring and ring (1 0) into the cup base (6) .

3.  Mount the glass jug(3) onto the cup base unit and tune the cup base unit in clockwise direction unit it is 

fixed.

4.  Mount the jug with cup base onto the base unit.

5.  After putting the ingredients in the jug, fix the lid (2) onto the jug by pressing down.

6.  Insert the inner cover(1) into the opening of the lid, and tune it in anticlockwise direction unit it is locked.

Reviews: