manualshive.com logo in svg

RTA Techni Mobili RTA-3992D, Assembly Instructions Manual, Page: 5 / 8

Share
Download
RTA Techni Mobili RTA-3992D Assembly Instructions Manual Download Page 5

ASSEMBLY STEPS

First screw the bolts 

Ⓐ

 into the underside holes of the shelf 

⑦

, then align the cam 

locks on 

one of 

the support panel

s

 

⑧

 and assemble both panels as shown and as 

explained in page 3.

STEP 1

Hardware/Tools:

🅐

6x40mm

2

Pcs

P.

5

RTA-

3992D

P.

5

STEP 2

Hardware/Tools:

🅒

6x55mm

12

Pcs

Refer to page 3.

Use screws 

Ⓒ 

to assemble in between the left and right leg structures 

① 

and 

②: 

-

The 

s

helf 

⑦ 

and support panel 

⑧

 in the middle.

-

The 

other support panel 

⑧

 at the front/top.

-

The back panel 

⑥

 at the back/top.

IMPORTANT: Screw loosely, and tighten only after all the panels are in place.

YES √

NO 

X

All the panels come with pre-

aligned insert nuts that look like 

screws. Please check them first 

and re-align them with screwdriver 

if necessary so they can properly 

receive the screws. 

Pay attention to the 

orientation of the holes 

on panel 

⑧.

Summary of Contents for Techni Mobili RTA-3992D









Reviews:

No comments