RTA-2012
P.2
P.2
Main Structure,
x2
Crossbars,
X1 SET
Horizontal Tube,
x2
Tabletop,
x1
Studs,
x4
M6x40,
x4
M6x15,
x4
M6x30,
x6
Allen Wrench,
x1
⚠
BEFORE YOU START THE ASSEMBLY, PLEASE READ THE
FOLLOWING TIPS AND WARNINGS.
☛
Do a quick inventory to make sure the product contains all the parts and hardware.
☛
Missing, damaged and defective parts can be replaced at no cost to you. Please
refer to the CONTACT and the WARRANTY cards included with the product.
☛
If during assembly you find an issue or need clarification, please contact our Customer
Service for assistance. Please refer to the CONTACT card included with the product.
☛
On each step read the instructions and analyze the illustrations thoroughly before
proceeding to do the assembly.
☛
To avoid misalignments, always leave the screws loose and tighten them until all pieces
are positioned correctly.
☛
Do not overtighten or force the screws as they might break, strip, damage the threads
of the holes or get stuck inside the part.
☛
Make sure you understand which hardware will be used on each step. Using the wrong
size of screw, bolt or pin might cause damage to the part in which it is being used.
