Real Time Automation, Inc.
37
1-800-249-1612
17)
Expand the Module list under the catalog on the right panel to show the available modules to insert
into the device overview slots.
To insert a module, double click to add it to the next available slot.
18)
the Network view tab, click the port of PLC, click the Compile button and Download to Device
button (in red).
19)
Once everything is downloaded to the PLC there will be a green check box on both devices, then
click
Go Online
(see red box).
Terminology Note and Example:
I addresses refer to input, Q addresses refer to output, %B refers to
bytes and %W refers to words. So in this case, you would use %IB1-8, %IB68-195 and %QB1-32 to
access the data to/from the gateway in the PLC.
NOTE: When using a Short String Data Type, the 1
st
byte of each slot is reserved for the
Length field. The remaining bytes will be used for the actual data.
