Real Time Automation, Inc.
5
1-800-249-1612
460 Gateway Device Line
460MXE
Accessing the Main Page
Before you can configure the gateway itself you must configure the network settings to connect the
gateway. The following steps will connect the gateway properly.
1) Connect a 7-30 VDC power source to the device.
2) Using the crossover cable (supplied) connect the device to the PC. (NOTE: If you are connecting to the
device via a hub or a switch use a standard Ethernet cable.)
3) Insert the provided CD-ROM.
4) Run the IPSetup.exe program from the CD-ROM.
5) Configure the IP address for your subnet.
6) Click Set.
7) Click Launch Webpage. The Main page will appear.
NOTE
Browser configuration is only Internet
Explorer compatible. The use of Fire-
Fox is not supported.
Default IP address is 192.168.0.100
