RTA 460ETCBM-NNA1 Product User Manual Download

Page: 64 / 76

Real Time Automation, Inc.

1-800-249-1612

Diagnostics

– Allen-Bradley PLC

Select the

Allen-Bradley PLC

in the dropdown menu on the Diagnostics Page to view a breakdown of the

diagnostics and common strings that are displayed on the page. You may also view individual counters
by selecting the device in the

All PLC’s

dropdown menu and clicking

View

. Additional diagnostic

information can be found by clicking the

Help

button.

NOTE

: This page will auto-refresh every five seconds with the latest data.

Clear All Values

- This will only affect displayed values.

This will reset all displayed values back to zero and clear the Status Strings.

Example: If viewing Allen-Bradley PLC

–

ETC01 10.1.100.18, this will only clear the values for that

specific PLC. This will reduce the

All PLC’s

values indirectly, otherwise select All PLCs to clear all

devices.

Device Status

- This will only display when viewing

All PLCs

Connected

–

The gateway is connected to all the PLCs that are configured and enabled.

Nodes Missing (timed out)

–

One or more enabled PLCs are missing.

Empty Scan List

–

No PLCs are configured.

Dependency Protocol Faulted

–

The dependent protocol is missing causing the communication

to go to inactive.

Summary of Contents for 460ETCBM-NNA1













































































Search results

Summary of Contents for 460ETCBM-NNA1

Reviews:

Related manuals for 460ETCBM-NNA1

Brands by name

Popular brands

RTA 460ETCBM-NNA1, Product User Manual

Search results

Summary of Contents for 460ETCBM-NNA1

Reviews:

Related manuals for 460ETCBM-NNA1

Brands by name

Popular brands